Support Center

OLP IR Learning

Last Updated: Aug 04, 2016 03:20PM EDT

If you do not see the option to learn commands with your OLP, you will need to update your firmware


Follow the steps below to capture commands from your IR remote

  1. Type the IP address of your OLP 201 into your browser
  2. Go to IR learning
  3. Click Start Learning
  4. Execute IR command
  5. Copy data
  6. Paste into builder


1. Type the IP address into your browser 

2. Choose the IR Command Learner option on the left 

3. Click the option to start learning 

4. Using physical remote point at the front of your OLP and execute command. Our testing has shown that a distance between 6" and 4' away from the front of the OLP has provided the best results in capturing the command. 

5. Copy learned data from webpage

6. Create new device in the builder by clicking green + sign 

7. Within new device right click and add device code within the pronto hex field

8. Within properties window paste your command.  
-- In order to paste you will need to use keyboard shortcuts ctrl v or command v if using a mac
-- You will also want to change the name of your command here as well

Contact Us
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found